CSSE4011: Particle_Boron: Zephyr Board Guide
1.0 Prerequisites
Complete following OS tutes
- Getting Started
- First Program
1.1 Test Hardware
- Particle Argon
- 2 x mUSB Cable
- Segger J-Link EDU mini
5.0 Install JLinkSoftware/SEGGER Tools
NOTE: For flashing to work (using Segger JLink devices), you must first install J-Link Software and Documentation pack in your VM, use the 64-bit DEB installer for Debian/Ubuntu.
To install this, open up a terminal and navigate to download location.
cd ~/Downloads
#Make sure the file name is right, versions change often
sudo dpkg -i JLink_Linux_V762_x86_64.deb
Make sure that the JLink device is connected up properly to the Thingy52 device, and ensure that the power switch is to the left (facing you - on position). It is a good idea to have the device connected via mUSB for charging during this procedure.
Once this has been completed, you can test that it is functional with
SEGGER J-Link Commander V7.62 (Compiled Feb 16 2022 16:09:54)
DLL version V7.62, compiled Feb 16 2022 16:09:39
Connecting to J-Link via USB...O.K.
Firmware: J-Link EDU Mini V1 compiled Dec 7 2021 08:38:51
Hardware version: V1.00
S/N: 801026632
License(s): FlashBP, GDB
USB speed mode: Full speed (12 MBit/s)
VTref=3.286V
at this point if you get
This means that either your connections are wrong or more likely that the VM has not been passed the USB from host. You can test this by running.
If you do not see this device, check if the host can see this device, if so, you will need to configure the VM to allow passthrough for the SEGGER EDU Mini.3.0 Build a Sample Program (Blinky) for the Argon Board
If the installation was successful, we should now be able to build a basic blinky program. In the following command, the '-p auto' option automatically cleans byproducts from a previous build if necessary, which is useful if you try building another sample.
The '-b' option specifies a board to build for, in this case the particle_argon, followed by the path to the app source.
Flash the sample program. Make a sure a 'runner' is connected. You will be given a Segger J-Link device to be used with the Particle Argon.Option '-r' specifies to flash using JLink, west is capable of tapping into different runners for flashing your devices, later we will explore how to specify runners in the CMakeLists file.
Additional information for setting up other runners can be found here
4.0 Example with Particle Argon - Zephyr
The particle argon has a simple build and flash procedure. To build for it:
the argon can now be flashed with